Looking for PDF Files?

Find fast PDF Files, enter what you are looking for!

Astm D1640


Sponsored High Speed Downloads
ASTM D1640 [Full Version]
4210 dl's @ 3709 KB/s
ASTM D1640 - Fast Download
4449 dl's @ 3444 KB/s
ASTM D1640 - Direct Download
4133 dl's @ 3888 KB/s


Typical Physical Properties - Henry

dry through (astm d1640-69, 5.6) 12 hours dry-to-recoat (astm d1640-69, 5.7) 12-24 hours shelf life: (unopened container above 32°f) – 1 year .

http://www.henry.com/.../PE12012_techdata.pdf

1. PRODUCT NAME accordance with ASTM D562, ASTM D711, ASTM ...

d1210, astm d1475, astm d1640, astm d2243, astm d3960, astm d2486, astm d2805, astm e70, and astm e1347. (see chart below) 5. installation asphalt and concrete pavement

http://www.sealmaster.net/.../FastDryHDTP.pdf
 

Coatings Testing Capabilities - Martin Testing Laboratories

drying, curing and film formation, astm d1640 drying times using mechanical recorders, astm d5895 ... clear water repellant coatings on wood, astm d5401

http://www.martintesting.com/.../Coatings_Testing_Cap...pdf

ACRYLIC ELASTOMERIC COATING - Henry

dry through (astm d1640-69, 5.6) 12 hours dry-to-recoat (astm d1640-69, 5.7) 12-24 hours shelf life: (unopened container above 32°f) – 1 year .

http://www.henry.com/.../PE11526_techdata.pdf
 

Product Data Sheet - VersaFlex Incorporated

astm d4060 8 - 18 gel time astm d1640 15 – 25 seconds tack free astm d1640 ~3 minutes tested in accordance to epa 9090a, larr approval (ca)

http://www.versaflex.com/.../59

Concrete Curing Compound (ASTM C309 Class ‘A’)

zahabiya concre-cure is an astm c309 class ‘a’ type concrete curing compound, providing an economical safe and efficient means of ... [astm d1640] safety: ...

http://www.zahabiya.com/.../concrecure_wb.pdf
 

Product Data Sheet - VersaFlex Incorporated

gel time astm d1640 ~1 minute tack free astm d1640 2 – 3 minutes open to light foot traffic astm d1640 60 minutes tensile strength (psi) astm d638 600 ...

http://www.versaflex.com/.../86

Paint, Rapid Dry Waterborne Traffic Line, White, Yellow ...

accordance with astm designation: d1640 except that the pressure exerted shall be the minimum needed to maintain contact between the thumb and the paint film.

http://www.dot.ca.gov/.../ptwb_01R2_Mar10.pdf
 

C:MaSSv7 eportsGB ASTM M 514 - Paint-n-Colour

hard dry [astm d1640 7.7] 16hrs 12hrs 8hrs 5hrs pot life 120mins 90mins 60mins 30mins overcoating data - see limitations substrate temperature 10°c 15°c 25°c 35°c

http://www.paintncolour.com.au/.../Intershield_159.pdf